Common diseases of solid wood flooring

All about Angel's Vox, an unique software audiobook player for Windows

Common diseases of solid wood flooring

Postby qzz10011 » Wed Nov 15, 2017 6:39 am

<P>Refers to the floor after some paint, giving a dirty "gray Meng" feeling, and some even footprints clearly visible. To avoid this situation, pay attention to the polished surface to paint before cleaning is essential.Moth-eaten: In order to prevent moth-eaten, one is to buy through the drying kiln steaming process to produce the floor, despite the price is more expensive, but the eggs have all been killed in wood; Second, carefully selected keel, Bark, no need.</P>
<P>Grilled seams: Some floors shop for a few days, there will be a large gap between the slats. This is mostly related to the water content before the laying of the floor is too high, due to indoor heat or shrinkage. Note that the moisture content of the floor before laying should be 8% 13%, and after the oiling time to finish.</P>
<P>Sounded: As the quality of the floor is not high, people will make a squeaking noise when walking above. To this end, we must pay attention to the keel and the ground, between the floor and the keel to be solid, with the appropriate number and length of the nail. At the same time, to prevent the number and length of the appropriate. At the same time, to prevent too much keel spacing or moisture content is too high, or loose dry shrinkage after laying, will also have a certain impact.</P> "fireproof deck pads from home depot,lowest maintenance wood deck,how to install plastic wood composite subfloor in basement "
qzz10011
 
Posts: 2973
Joined: Thu Aug 20, 2015 3:20 am

Return to Angel's Vox

Who is online

Users browsing this forum: sentoni and 11 guests